#SHAREX CUSTOM UPLOADER CODE#

Plate products shall comply with ASTM A-36.Ī. All hollow structural steel shapes shall be cold formed HSS ASTM A-53 grade C, unless otherwise noted.į. All non-hollow structural shapes comply with ASTM A-36, unless otherwise noted.Į. Schedule 40 black pipe fabrications shall be sandblasted and primed as described below.ĭ. Structural steel tubing up to 5”-7 Gage shall be galvanized per Allied Steel FLO-COAT specifications. All Steel used on this project needs to be new and accompanied by the mill certificates if requested. All steel is cleaned, degreased or etched to ensure proper adhesion of powder-coat in accordance with manufacturer’s specifications.Ĭ. All fabricated steel must be in accordance with approved shop drawings and calculations.ī. Chain stitch thread – 2400 Denier or equal.Ī.

Lockstitch thread – 1200 Denier or equal.į. Shall be unaffected by non-hydrocarbon based cleaning agents, acid rain, mildew, rot, chlorine, saltwater, and pollution.Į.

Abrasion resistant and UV radiation immunity.ĭ. Shall have a wide temperature and humidity range.Ĭ. Shall be 100% expanded PTFE fiber which carries a 10 year warranty that is high strength and low shrinkage.ī.

Fading: Minimum fading after 6 years (Note: 3 years for Red and Yellow)Ī.

Fabric Weight (oz/sqFT) Average: 1.02 to 1.07.

Tear Tests (lbs/ft): WARP 44.8 and WEFT 44.

Others: NFPA 701-99 (Test Method 2), ASTM E-84 Alnet Extra Block: California State Fire Marshall Reg. Cloth meets fire resistance tests as follows: Material to be Rachel-knitted to ensure material will not unravel if cut.ĭ. The fabric knit is to be made using monofilament and tape filler which has a weight of 9.38 to 10.32 oz. The high density polyethylene material shall be manufactured with tensioned fabric structures in mind.Ĭ. UV shade fabric is made of UV stabilized cloth manufactured by ALNET, or approved equal.ī. More importantly, if your shelter is being installed over a playground, we will make sure it conforms with local building codes as well as CPSC Playground Safety Standards. Our team of expert installers will make sure that your shade structure of metal shelter is installed correctly and looks beautiful.

We have installed over 100 shade and shelter structures of all shapes and sizes across the United States.

#SHAREX CUSTOM UPLOADER CODE#

Additionally, almost every shade structure or shelter will require both permitting and engineering to make sure that it is safe and building code compliant. Installing a Fawn Creek, Kansas commercial shade structure or metal shelter can be a difficult task, requiring knowledge of construction principals and engineering, in many cases it may also require the use of heavy equipment. Our all steel shelter products are commercial grade and generally more durable and affordable than a custom built shelter. We offer a variety of styles of Fawn Creek, Kansas shade structures and metal shelter products. Our shade structures are made of the highest quality materials and workmanship, capable of standing up to heavy wind loads, UV and more. We offer a huge selection of both pre-engineered and custom designed Fawn Creek, Kansas shade and shelter products.

Sharex custom uploader